Auto Gas Releasing Control Panel
PE-GRP200/400 Series
Program Auto Gas Releasing Control Panel GRP 200/400 Series manufactured in accordance to MS 1745-2 : 2004 and conformed to local CIFS requirement.
PE-GRP 200/400 series is a microprocessor programmable user-friendly control panel with a digital ammeter, voltmeter and a countdown timer displayed on the front panel. Count down timer is pre-set for 30 seconds upon two (2) activated zone. The timer can be programmed to the required specification.
Built-in power pack with an intelligent charger which allows to charge up a set of complete flat 24 volts battery and automatically cuts off charging once battery fully charge.
This controls and indications are housed in a compact enclosure finished with signal red polyester epoxy powder paint. Indoor and outdoor type of enclosure is available.
STANDARD FEATURES
Power Source Indicators
Power Failure Indicators
Zone Fire, Fault and Isolate Indicators
Bell Isolate Switch and Indicator
Gas Isolate Switch and Indicator
Fault Buzzer Mute Switch
Master Reset Switch
Test Lamp Switch
Test Battery Switch
Earth Fault Supervisory
Built-in Delay Discharge Timer (Programmable)
NEW FEATURES
Gas Abort Function (Optional)
Digital Voltmeter & Ammeter
Intelligent Battery Charger
Digital Countdown Timer
Common Fault Contact
Low Pressure Indicator
Model no. | No. of
Zones |
Normal Type
Size (mm) (W x D x H) |
Weatherproof Type
Size (mm) (W x D x H) |
PE-HP2000 | 2 | 430 x 370 x 195 | 430 x 410 x 195 |
PE-HP4000 | 4 | 550 x 390 x 195 | 550 x 430 x 195 |
Power Supply Input | 240V AC 50Hz |
Operating System | 24V DC |
Charger | Automatic/Trickle Type |
Charging Rate | 300mA (Trickle) / 2.5A (Boost) |
STANDBY MODE | |
Master | 75mA |
Per zone (with detectors) | 5mA |
Flashing Lights (Red LED) | 75mA |
ALARM MODE | |
Master | 120mA |
Per Trigger Zone | 70mA |
Output Devices | 100mA |
Flashing Lights (Red LED) | 75mA |
Per Bell | 30mA |